Ricoh Gim-MF1a Field Service Manual page 223

1-106-002 RollerEnds
1-106-003 MachinePowerOn
[Micro Ptcl SW]
1109
The switch that turns ON/OFF the micro particle countermeasure mode.
1-109-001 0:Off 1:On
1113 [Env Fus Cond]
1-113-001 PrePrtRotTime
[Inrush Control]
1135
Enables or disables the setting of Inrush control (0: Disabled, 1: Enabled)
1-135-001 Inrush control
[Nip Width Measuring]
1152
Checks the fusing nip band.
1-152-001 0:Off 1:On
[Fusing Jam Detect]
Disables or enables the consecutive jam error for the fusing unit.
1159
When set to "1" (on) this SC code is issued after the 3rd consecutive jam in the fusing
unit.
1-152-001 SCdisplay
[-20 to 250 / 0 / 1deg/step]
E
Displays the current fusing thermistor
temperature (Ends).
[-20 to 250 / 0 / 1deg/step]
Displays the external temperature measured
E
at power On, which is detected with the
temperature and humidity sensor.
E [0 or 1 / 0 / 1 / -]
E [500 to 60000 / 7000 / 500msec/step]
E [0 or 1 / 0 / 1 /step]
E [0 or 1 / 0 / 1 /step]
[0 or 1 / 0 / 1 /step]
E 0: Not detects SC
1: Detects SC
Main SP Tables-1
27