Ricoh Gim-MF1a Field Service Manual page 232

3. Appendices: SP Mode Tables
2-301-003 T(+)_2_BackOffset
2-301-101 Used Adjust A2
2-301-102 Used Adjust A3
2-301-103 Used Adjust A4
2-301-104 Used Adjust A5
2401 [Timing Control]
2-401-003 T[rotation print]
2-401-004 T[rotation WU]
2411 [envi_section]
2-411-001 AH_LM
36
[-15 to 15 / 0 / 1uA/step]
Displays the setting of the offset amount of
E
transfer constant current level during creating
an image on the back page.
[0 to 100 / 80 / 1%/step]
Output adjustment for the value of the
E
transfer output table which is to be a basis
when the transfer paper count is in the range
of 15K and 30K.
[0 to 100 / 70 / 1%/step]
Output adjustment for the value of the
E
transfer output table which is to be a basis
when the transfer paper count is in the range
of 30K and 60K.
[0 to 100 / 65 / 1%/step]
Output adjustment for the value of the
E
transfer output table which is to be a basis
when the transfer paper count is in the range
of 60K and 90K.
[0 to 100 / 60 / 1%/step]
Output adjustment for the value of the
E
transfer output table which is to be a basis
when the transfer paper count is over 90K.
E [600 to 9900 / 600 / 100msec/step]
E [600 to 9900 / 5000 / 100msec/step]
[0.0 to 10.0 / 5.5 / 0.5g/m
Displays and adjusts the threshold under
E
low/mid humidity on environment section in
regard to control the Environment Correction.
3
/step]