Starting The Copier; When The Main Switch Is In The Stand-By Position - Ricoh FT2012 Operating Instructions Manual

STARTING THE COPIER

When The Main Switch Is In The Stand-by Position

1
Turn on the main switch.
..........................................................
2
Wait for the copier to warm
up. During the w arm -up pe-
riod, the indicator on the Start
key stays red.
..........................................................
3
When the warm-up period is
completed, the indicator on the
Start key turns green. The
copier is ready to make copies.
At the end of the day, turn off the
main sw itch.
8
STARTING THE COPIER
STARTING THE COPIER