Debug Log; Overview - Ricoh Gim-MF1a Field Service Manual

Debug Log

Overview

To check the machine's operational status, obtain the following log entries from the machine.
Log entries to obtain
• Log entries on the machine operation and parameters.
• Log entries on the changes to the machine status
• Only log entries for the controller (not including log entries for the engine)
Output format
• Text format
What you need
To obtain log entries from PC
• A laptop PC with a compatible OS
• PC console (dbgmon.exe)
• gawk
• The compatible OSs are shown below.
32bit
64bit
• * Note: Windows certification is necessary for Windows 8 (64 bit), which can be
gained by the following procedure;
• 1. Shift to test mode
Start the command prompt with administrator authority and execute [bcdedit /set
TESTSIGNING ON].
• 2. Disable the enforcement of driver signature
The Charms bar > [Settings] > [Change PC Settings] > [General] > [Advanced
startup] > [Restart now'] > [Troubleshoot] > [Advanced Options'] > [Windows
Startup Settings] > [Restart]
After restart, select [Disable Driver Signature Enforcement].
• 3. Install the driver
Windows XP Windows Vista
Yes Yes
Yes Yes
Windows 7 Windows 8
Yes Yes
Yes See the note below *
Debug Log
133