Adf Image Adjustment - Ricoh Gim-MF1a Field Service Manual

ADF Image Adjustment

Registration
• A: Leading edge registration
• B: Side-to-side registration
• Use "Test Sheet" to adjust this setting.
1. Place the test sheet on the ADF and make a copy from one of the paper feed trays.
2. Check the registrations, and adjust as necessary with the appropriate SP modes, as
follows.
Allowable Misregistration: 4.2 ± 2 mm (Leading edge) / 2 ± 1 mm (Left, right)
SP No.
SP6-006-001
SP6-006-003
Magnification
1. Place the test sheet on the ADF and make a copy from one of the paper feed trays.
2. Check the magnification and adjust it with SP6-017-001 if necessary.
SP No.
SP6-017-001
Name
ADF Adj. Regist:Side-to-Side:Front
ADF Adj. Regist:L-Edge(Front): Front
Name
ADF Mag. Adj.:L-Edge: Front
Troubleshooting
Range
± 3.0 mm
± 3.0 mm
Range
± 1.0 %
177