Paper Transport; Exit / Switchback Sensor; Duplex Entrance Sensor - Ricoh Gim-MF1a Field Service Manual

Paper Transport

• Turn off the main power switch and disconnect the power cord before you start any of the
procedures in this section. (page 35 "General Cautions")

Exit / Switchback Sensor

1. Upper Cover (page 42 "Upper
2. Exit / Switchback Sensor [A] (Hook,

Duplex Entrance Sensor

1. PSU (page 92 "PSU")
2. Duplex Clutch (page 62 "Duplex
3. Open the duplex exit guide plate [A].
4. Remove screws circled in the picture below (
[A] Duplex exit guide unit
Cover")
x 1)
Clutch")
x 5).
Paper Transport
83