Ricoh Gim-MF1a Field Service Manual page 234

3. Appendices: SP Mode Tables
2-926-003 Recovery Count
2-926-004 Self-Recovery
2927 [Initial Supply]
2-927-001 Initial Amount
2-927-002 Initial Mixing T
2-927-003 Ini-Coefficient
2-927-004 Initial Flag
2-927-005 Exchange Count
2930 [Detection]
2-930-001 Cleaner Count
2-930-002 stabilization T
38
[0 to 10000 / 0 / 1count/step]
E
Total count of executed Recovery Supply
[- / - / -]
E [Execute]
Forcibly executes one time Recovery Supply.
[1 to 50 / 10 / 1g/step]
E
Target toner amount for supplying fixed
amount of toner when replacing.
[0 to 300 / 10 / 1sec/step]
E
Idle time to mix for supplying fixed amount of
toner when replacing.
[0.0 to 5.0 / 1.5 / 0.1/step]
Coefficient for calcurating the amount of
E
toner supplying during printing after toner
cartridge is replaced.
[0 or 1 / 0 / 1/step]
E
Information used to detect the replacements
and judge the upper limit.
[0 to 1000 / 0 / 1count/step]
E
Counter for new toner detection.
[1 to 20 / 5 / 1cycle/step]
E
Counter to rotate the cleaner parts when
remaining toner in the developer detected.
[0.0 to 3.0 / 0.0 / 0.1sec/step]
E
Stability time of the sensor used for detecting
remaining toner in the developer.