Sc100 (Scanning) - Ricoh Gim-MF1a Field Service Manual

If the operator touches "Reset"
If the operator touches "Reset" to bypass the 30-second interval for the machine to reboot, the
machine reboots immediately and the operation panel displays the copy screen.
• Do not try to use the operation panel during an automatic reboot. If the Remote Service System is in
use, the SC code is sent immediately to the Service Center.

SC100 (Scanning)

SC No. Level
SC101-00
D
SC101-01
SC No. Level
SC120 D
Error Name/Error Condition/Major Cause/Solution
Exposure Lamp Error
The scanner has scanned the white plate, but cannot detect the certain
white level.
• Defective exposure lamp
• Defective exposure lamp stabilizer
• Defective power source harness
• Defective signal harness
• High-voltage cable leak
• Defective darkness starting characteristic
Turn the main power OFF and then ON.
Error Name/Error Condition/Major Cause/Solution
Scanner home position error 1
The scanner home position sensor does not detect the scanner leaving the
home position.
• Defective scanner home position sensor
• Defective scanner home position sensor harness
• Defective scanner motor driver
• Defective scanner motor
Turn the main power OFF and then ON.
Service Call
139