Ricoh Gim-MF1a Field Service Manual page 266

3. Appendices: SP Mode Tables
5-828-156 IPv6 Manual Address
5-828-158 IPv6 Gateway Address
5-828-160 Action Mode (IPv6)
5-828-161 IPv6 Stateless Auto Setting
5-828-217 IPsec Mode Setting
70
[ - / - / - ]
This SP is the IPv6 manually set address
referenced on the Ethernet or wireless LAN
(802.11b) in the format:
C
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits
configured in 8 blocks of 16 bits each.
[ - / - / - ]
This SP is the IPv6 gateway address
referenced on the Ethernet or wireless LAN
C
(802.11b). The IPv6 address consists of a
total 128 bits configured in 8 blocks of 16
bits each.
[00000000h to ffffffffh / 0x00000003f /
1/step]
1:on, 0:off
Refers to / Sets network protocol operation
mode.
bit0: DIPRINT
bit1: LPR
C
bit2: HTTP
bit3: SNMP
bit4: Bonjour
bit5: SSL/TLS
bit6 to 30: reserved
bit31: TELNET
[0 or 1 / 1 / 1 /step]
Enables or disables the automatic setting for
C
IPv6 stateless.
0: Disable, 1: Enable
[0 or 1 / 0 / 1/step]
Sets Enable/Disable for IPsec.
C
0: Disable
1: Enable