Update Error (Recovery Mode) - Ricoh Gim-MF1a Field Service Manual

No
.
1 Ready for updating
5 Updater standby
6 Receiving the image data
9 Decompressing the received data
11 Rewriting ROM
15 Checking ROM
17 Completing the update

Update Error (Recovery Mode)

If the error occurs during the firmware update, the message "Firmware update failed." appears on the
display.
Error Status
You can display the error status on the control panel, as follows:
Progress Machine Status
Ready
Waiting for the
received data
Receiving the data
Decompressing the
data
Rewriting ROM
Verifying
Completing the update
Updating the Firmware
Error Message
Updating firmware...
Firmware update
completed.
129