Ricoh Gim-MF1a Field Service Manual page 283

8191 [T:Total Scan PGS]
8192 [C:Total Scan PGS]
8193 [F:Total Scan PGS]
8195 [S:Total Scan PGS]
• These SPs count the number of scanned sides of pages, not the number of physical pages.
• These counters do not count reading user stamp data, or reading color charts to adjust color.
• Previews done with a scanner driver are not counted.
• A count is done only after all images of a job have been scanned.
• Scans made in SP mode are not counted.
[ADF Org Feeds]
8221
These SPs count the number of pages fed through the ADF for front and back side
scanning.
8-221-001 Front
8-221-002 Back
C
[0 to 9999999 / 0 / 1/step]
C
These SPs count the pages scanned by each
application that uses the scanner to scan
C
images.
C
[0 to 99999999 / 0 / 1/step]
Number of front sides fed for scanning:
With an ADF that can scan both sides
simultaneously, the Front side count is the
same as the number of pages fed for either
simplex or duplex scanning.
C
With an ADF that cannot scan both sides
simultaneously, the Front side count is the
same as the number of pages fed for duplex
front side scanning. (The front side is
determined by which side the user loads face-
up.)
[0 to 99999999 / 0 / 1/step]
Number of rear sides fed for scanning:
With an ADF that can scan both sides
simultaneously, the Back count is the same as
C
the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides
simultaneously, the Back count is the same as
the number of pages fed for duplex rear-side
scanning.
Main SP Tables-8
87