Ricoh Gim-MF1a Field Service Manual page 284

3. Appendices: SP Mode Tables
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
8381
8382
8383
8384
• When several documents are merged for a print job, the number of pages stored is counted for the
application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
8411
8-411-001
8581
8-581-001 Total
8591
88
[T:Total PrtPGS]
[C:Total PrtPGS]
[F:Total PrtPGS]
[P:Total PrtPGS]
[Prints/Duplex]
This SP counts the amount of paper (front/back counted as 1 page) used for duplex
printing. Last pages printed only on one side are not counted.
-
[T:Counter]
These SPs count the total output broken down by color output, regardless of the
application used. In addition to being displayed in the SMC Report, these counters
are also displayed in the User Tools display on the copy machine.
[O:Counter]
This SP count the number of duplex pages printed. This total is for Other (O:)
applications only.
C
[0 to 99999999 / 0 / 1/step]
C These SPs count the number of pages printed
by the customer. The counter for the
C
application used for storing the pages
increments.
C
C [0 to 99999999 / 0 / 1/step]
C [0 to 99999999 / 0 / 1/step]