Return To Stand-By Mode; Recommendation - Ricoh RN-MF2 Field Service Manual

Return to Stand-by Mode

Energy Saver Mode 1
• Recovery time: 10 sec.
Energy Saver Mode 2
• Recovery time: 20 sec.

Recommendation

We recommend that the default settings should be kept.
• If the customer requests that these settings should be changed, please explain that their energy
costs could increase, and that they should consider the effects on the environment of extra energy
use.
• If it is necessary to change the settings, please try to make sure that the Energy Saver Mode 2 Timer
is not too long. Try with a shorter setting first, such as 30 min., then go to a longer one (such as 60
min.) if the customer is not satisfied.
• If the timers are all set to the maximum value, the machine will not begin saving energy until 240
minutes has expired after the last job. This means that after the customer has finished using the
machine for the day, energy will be consumed that could otherwise be saved.
Energy Save
151