Ricoh Gim-MF1a Field Service Manual page 246

3. Appendices: SP Mode Tables
5067
5-067-001 PCDU
5-067-009 Fusing Unit
5081
5-081-001
5083
5-083-001 Toner Near End
5302
5-302-002 Time Difference
50
[Parts PM System]
Selects the whether to perform the service management or user management as the
PM management. The system banner and the message in which the system warning
screen appears varies according to this setting.
[ServiceSP]
DFU
Swtich Code
[Led Switch]
Specifies whether the alert LED is lit or not when toner near end condition is
detected. (This does not change the toner near end condition indication in the
operation panel LCD.)
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
JP: +540 (Tokyo)
NA: -300 (New York)
EU: + 60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
KO: +540 (Korea)
C [0 or 1 / 0 / 1/step]
0: Service management
C
1: User management
C [ - / - / - ]
[0 or 1 / 0 / 1/step]
C 0: Off
1: On
C [-1440 to 1440 / -300 / 1min./step]