• [1]: Paper feed direction
• [2]: Print area
Adjustment Reference Values
• B: Leading edge (Sub scanning direction): 3.0 ± 1.5 mm
• D: Trailing edge (Sub scanning direction): 3.0 mm
• C: Left (Main scanning direction): 2.0 ± 1.5 mm
• A: Right (Main scanning direction): 2.0 mm
Adjustment Procedure
1.
Print the test sheet.
• Print the test sheet, and then adjust the leading edge registration in the SP mode to the
optimum value.
2.
Do SP1-002-(001,002,003,006) to check and adjust the registration.
3.
Check the side-to-side registration for each paper feed trays.
Scanner, ADF Image Adjustment
Scanner Image Adjustment
Before the scanner adjustment, do the Side-to-Side registration and blank margin width adjustment.
(page 173 "Test Sheet
Printing")
Troubleshooting
175