Ricoh Gim-MF1a Field Service Manual page 264

3. Appendices: SP Mode Tables
5-828-003
5-828-006
5-828-008 Enabled Protocol
68
IPv4 Default Gateway
(Ethernet/IEEE 802.11)
DHCP (Ethernet/IEEE
802.11)
[00000000h to ffffffffh / 00000000h / 1/
step]
Refers to / Sets IPv4 address used in Ethernet
C or wireless LAN access.
Data is handled in 8 bits when displaying
current value, or on operating part, or
printing with summary print.
[0 or 1 / 1 / 1/step]
0: Not used (manual setting)
1: Use
C
Refers to / Sets whether or not to set IP
address using DHCP in Ethernet or wireless
LAN access.
[0 to 255 / 1 / 1/step]
0:off, 1:on
Refers to / Sets enabled protocol used in
network.
bit0: IPv4 0: off, 1: on (0x01)
C
bit1: Reserved 0: off, 1: on (0x02)
bit2: Reserved 0: off, 1: on (0x04)
bit3: Reserved 0: off, 1: on (0x08)
bit7: IPv6 0: off, 1: on (0x80)