Ricoh Gim-MF1a Field Service Manual page 62

4. Replacement and Adjustment
3. By-pass Bottom Plate Clutch
4. Paper Feed Clutch
5. By-pass Feed Clutch
6. Temp Humid Sensor
7. Paper Size Detection Switch
8. Gear Unit [A] (
• Before attaching the Gear Unit [A], close the front cover and put the tab [B] on the front cover
arm through the link part hole [C] on the Gear Unit back side.
• Make sure that correct side of the gear is attached when attaching the Gear [D].
60
(page 62 "By-pass Bottom Plate
(page 58 "Paper Feed Clutch")
(page 61 "By-pass Feed
(page 102 "Temp Humid
(page 81 "Paper Size Detection
x 4, x 1, Gear x1)
Clutch")
Clutch")
Sensor")
Switch")