Ricoh Gim-MF1a Field Service Manual page 262

3. Appendices: SP Mode Tables
5-816-209 Instl Clear
5818 [Network Setting]
5-818-010 Print Time Out
66
Operation Error,Incorrect
Setting
Error Caused by Response
from GW URL
Attempted registration without
-12003 execution of an inquiry and no
previous registration.
Attempted setting with illegal entries
-12004
for certification and ID2.
A confirmation request was made after
-12006 the confirmation had been already
completed.
Update certification failed because
-12008
mainframe was in use.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 Basil not managed
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
[- / - / -]
[Execute]
C
Releases the machine from its embedded
RCG setup.
[5 to 300 / 15 / 1/step]
C
Sets timeout time for DIPRINT or LPR printing.