Ricoh Gim-MF1a Field Service Manual page 30

2. Installation
Value
Proxy error (Illegal user name or
5
password)
8 Other error
Request number confirmation
9
executing
20 Dial-up authentication error
21 Answer tone detection error
22 Carrier detection error
23 Invalid setting value (modem)
24 Low power supply current
25 unplugged modem
26 Busy line
8. Exit the SP mode.
SP5816-208 Error Codes
Cause
Operation Error,
Incorrect Setting
28
Meaning
Code Meaning
-1200 Attempted registration without
3 execution of a confirmation and
no previous registration.
-1200 Attempted setting with illegal
4 entries for certification and ID2.
-1200 A confirmation request was made
6 after the confirmation had been
already completed.
-1200
Update certification failed
8
because mainframe was in use.
Solution/ Workaround
Check Proxy user name and password.
See "SP5816-208 Error Codes" below this.
Processing... Please wait.
These errors occur only in the modems that
support @Remote.
Solution/ Workaround
Perform Confirmation before
attempting the Registration.
Check ID2 of the mainframe.
Execute registration.
Check the mainframe
condition. If the mainframe is
in use, try again later.