Genie Z-80/60 Service And Repair Manual page 90

Service and Repair Manual
Display Module
Screen or Menu
Options With key switch
and hold the enter button
and turn key switch to on
position.
Release the enter button and
press
(minus)(minus)(plus)(plus).
78
Procedure
, press Boom Length Limit: No Limit (NO
OFF
LT),
Secondary Extend disabled (EXT
LT),
Secondary Function disabled (SEC
LT)
AC Generator
(NONE/BELT/HILO/HYDRL/GHG10)
Alarm No (NO AL)/Motion (MO AL)
Travel (TR AL)/ Descent (DE AL)/
Travel and Descent (TD AL)
Lift/Drive No (NO CO)/ Drive cut out
while not stowed (DCONS)/ Lifting or
driving (LORDR)
Aux Drive OPT: (YES/NO)
Proximity Kill Switch (NONE/PROX)
Platform Overload (NONE PLFTS)
Work Lights (YES/NO)
Flashing Beacon (YES/NO)
Drive Lights (YES/NO)
Disable Steer Mode Change while
Driving (YES/NO)
Rocker Joystick Steering (YES/NO)
Chassis Tilt Cutout (YES/NO)
Foot Switch Lockout (0-30 minutes)
Description
September 2016
Range or Selection
30.0 max and 0.0 min,
10.0 (default)
Holding +/- button will
cause display to scroll
through options or
increment number
settings automatically at
0.2 min
increase/decrease
Part No. 1268556