Genie Z-80/60 Service And Repair Manual page 72

Service and Repair Manual
Engines
Deutz TD2011L04i models:
1 Tag and disconnect the wiring from the bell
housing.
2 Remove the U-bolt from the exhaust flex pipe
at the muffler.
Burn hazard. Beware of hot
engine components. Contact
with hot engine components
may result in severe burns.
3 Remove the muffler bracket retaining
fasteners from bell housing. Remove the
muffler and bracket assembly from the engine.
4 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing engine fasteners.
5 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
6 Remove the flex plate mounting fasteners, and
remove the flex plate from the engine flywheel.
Deutz TD 2.9 models:
1 Tag and disconnect the wiring from the bell
housing.
2 Support the drive pump with an appropriate
lifting device. Remove all of the bell housing
engine fasteners.
60
3 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
4 Remove the flex plate mounting fasteners, and
remove the flex plate from the engine flywheel.
Perkins 804D models:
1 Tag and disconnect the wiring from the bell
housing.
2 Remove the exhaust pipe clamp at the muffler.
Burn hazard. Beware of hot
engine components. Contact
with hot engine components
may result in severe burns.
3 Remove the muffler mounting bracket
fasteners. Remove the muffler and bracket
assembly from the engine.
4 Remove the hose clamps from the air cleaner
elbow and the engine intake manifold.
5 Remove the air cleaner mounting bracket
fasteners. Remove the air cleaner and bracket
assembly from the engine.
6 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing to engine fasteners.
7 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
8 Remove the flex plate mounting fasteners, and
remove the flex plate from the engine flywheel.
September 2016
Part No. 1268556