Genie Z-80/60 Service And Repair Manual page 77

September 2016
3 Press the enter button until FORCE DPF
REGENERATION or INHIBIT DPF
REGENERATION is displayed.
4 Press the plus button or the minus button to
select YES to change the regeneration mode
from the default automatic mode. The
selection will automatically return to NO. The
LCD will display the current mode while it is
Inhibited or Forced.
Note: The LCD messages REGEN FORCED and
WARNING HIGH EXHAUST SYSTEM TEMP will
be displayed while a regeneration mode is running.
No service is required.
Note: The LCD message REGEN INHIBITED is
displayed while in the Inhibit Regeneration mode is
active. To exit this mode, push in the Red
emergency stop button. Restart the engine.
Part No. 1268556
Service and Repair Manual
Engines
65