Gigabit Ethernet Line Card (Glc2) - Cisco ASR 5000 Installation Manual

ASR 5000 Hardware Platform Overview
The following shows the panel of the FLC2 with its interfaces and major components.
Figure 14: Fast Ethernet Line Card (FLC2)
Table 11: FLC2 Callouts
Item
1
2
3
4

Gigabit Ethernet Line Card (GLC2)

The GLC2 installs directly behind its respective packet processing card, providing network connectivity to
the packet data network. The GLC2 (Ethernet 1000) supports a variety of 1000 Mbps optical and copper
interfaces based on the type of Small Form-factor Pluggable (SFP) modules installed on the card.
Important
Description
Card Ejector Levers—Use to insert/remove card to/from chassis.
Interlock Switch—In its Down position the interlock switch notifies the system to safely power
down the card prior to its removal.
Card Level Status LEDs—Show the status of the card.
RJ-45 10/100 Ethernet Interfaces—Eight auto-sensing RJ-45 interfaces for R-P interface
connectivity carrying user data. Ports are numbered 1 through 8 from top to bottom.
The GELC has reached its end of life and is no longer available for purchase. It has been replaced by the
GLC2.
Gigabit Ethernet Line Card (GLC2)
ASR 5000 Installation Guide
25