What To Do With The Failed Application Card - Cisco ASR 5000 Installation Manual

Replacing Application Cards
Step 3
Repeat step 1 and step 2 to remove the module on the replacement SMC.
Step 4 Gently insert the module removed in step 1 into the socket on the replacement SMC.
Step 5 Replace the card retainer clip to secure the CompactFlash module in place.
Step 6
Proceed to Installing the Application Card, on page 217

What to do with the Failed Application Card

If the failed application card is still under warranty, return it to the vendor for repair.
What to do with the Failed Application Card
for instructions on installing the replacement SMC.
ASR 5000 Installation Guide
221