Chapter - Cisco ASR 5000 Installation Manual

Cabling the Switch Processor Input/Output Line
Card
This chapter provides information on the Switch Processor Input/Output (SPIO) line card interfaces and
instructions for installing the cables.
Important
This chapter includes the following sections:
•
•
•
•
•
SPIO Interfaces
The SPIO is available with the following types of interfaces:
• Two Gigabit Ethernet, fiber optical (SFP)
• Two 1000Base-T Ethernet, copper (RJ-45)
• One RS-232 interface (RJ-45)
• One Central Office alarms (10-pin Molex))
• One BITS (BNC or 3-pin connector)
Class 1 Laser Compliance Notice Because of the SFP interfaces, this product has been tested and found
to comply with the limits for Class 1 laser devices for IEC825, EN60825, and 21CFR1040 specifications.
SPIO Interfaces, page 85
Connecting to the Management LAN, page 88
Connecting to the Serial Console Port, page 91
Connecting to a BITS Timing Source, page 95
Connecting to the CO Alarm Interface, page 97
6
C H A P T E R
ASR 5000 Installation Guide
85