Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Replacing the Chassis Air Filter
a) Remove the plastic bezel from the lower-front of the chassis by placing your fingers in the notches on its sides and
pulling it toward you.
b) Use a Phillips #1 screwdriver to remove the fan tray cover. Loosen the four screws that secure it in place and pull it
away from the chassis.
Step 2 Raise the plastic tab above the face of the fan tray assembly and gently pull it toward you until the air filter is free from
the fan tray assembly.
Removing the Air Filter

ASR 5000 Installation Guide

193