Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Application Card Installation
Step 6 Push the ejector levers inward firmly and straight until the card is seated in the chassis midplane and you cannot push
the ejector levers in any further. Press firmly on the card's faceplate to ensure that it is fully seated. The card's front panel
should be flush against the chassis' upper and lower card mounts for the slot.
Step 7 Slide the interlock switch on the front panel of the application card upward to lock the ejector tab in place. The flange
on the left-side of the interlock switch prevents movement of the ejector tab when raised completely.
You must slide the interlock switch upward before securing the card's top screw to the mounting
Important
rail.
Installing Application Cards

ASR 5000 Installation Guide

71