Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Daily - Standard Health Check
Table 80: Health Checks
To do this:
Hardware
All hardware problems generate alarms that generate SNMP
traps. Review the trap history.
Check the status of the PFUs. the command output indicates
the power level for the cards in the chassis. All active cards
should be in an "ON" state.
Check the power status of an individual chassis.
View the status of the fan trays.
View the LED status for all installed cards. All LEDs for active
cards should be green.
Checking the temperatures confirms that all cards and fan trays
are operating within safe ranges to ensure hardware efficiency.
Physical Layer
View mapping of the line cards-to-controlling application cards.
View a listing of all installed application cards in a chassis.
Determine if all required cards are in active or standby state
and not offline.
Displays include slot numbers, card type, operational state,
and attach information.
Display a listing of installed line cards with card type, state,
and attach information. Run this command to ensure that all
required cards are in Active/Standby state. No card should be
in OFFLINE state.
View the number and status of physical ports on each line card.
Output indicates Link and Operation state for all interfaces –
Up or Down.
Verify CPU usage and memory.
System Status and Performance
Check a summary of CPU state and load, memory and CPU
usage.
Check NPU utilization within the chassis.
Check availability of resources for sessions.

ASR 5000 Installation Guide

170
System Monitoring
Enter this command:
show snmp trap history
show power chassis
show power all
show fans
show leds all
show temperature
show card mappings
show card table
show card table all
show linecard table
show port table all
show cpu table
show cpu info
show cpu table
show npu table
show resources utilization table