Replacing The Compactflash On An Smc - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
Replacing the CompactFlash on an SMC
Replacing the CompactFlash on an SMC
This section provides instructions for the removal of the CompactFlash card from the failed SMC and its safe
insertion in the replacement SMC.
Step 1
On the failed SMC, remove the card retainer clip that secures the CompactFlash module in the socket by pulling the ends
of the card retainer clips out and away from the socket.
Step 2
Gently pull the module out of the socket.
ASR 5000 Installation Guide
220
Replacing Application Cards
Advertisement
Table of Contents
