Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Cabling the Fast Ethernet (10/100) Line Card
Refer to the following figure and table for pinouts for the RJ-45 Ethernet ports.
Figure 42: 10/100 Ethernet Interface Pinouts
Table 39: 10/100 Ethernet Interface Pinouts 0
Pin
1
2
3
4
5
6
7
8
RX = Receive Data TX = Transmit Data
Be sure to label the interface cables with their destinations prior to connecting them to the FLC2. This
Important
will assure proper reconnection should the card need to be serviced.
To cable the FLC2, simply plug an STC Ethernet cable from a network device into the desired port.
100Base-T 100Mbps Cat5
TX+
TX-
RX+
Not applicable
Not applicable
RX-
Not applicable
Not applicable
FLC2 Interfaces

ASR 5000 Installation Guide

105