Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Optical (ATM) Line Card Interfaces
Module Type
Multi-mode
Optical Fiber
The SFP interface is only certified to work with SFP transceiver modules purchased from Cisco for use
Important
with the OLC2.
Because of the optical SFP interface, this product has been tested and found to comply with the limits for
Important
Class 1 laser devices for IEC825, EN60825, and 21CFR1040 specifications.
The following figure shows the optical interface, labelled ATM/POS OC-3, for the optical (ATM) line card.
Each SFP fiber interface is equipped with a transmit (TX) port and a receive (RX) port.
Figure 47: OLC-Optical (ATM) Line Card Fiber Interfaces

ASR 5000 Installation Guide

118
Card Interface
Identification Type
ATM/POS Multi-mode
OC-3 Fiber, LC
Multi-Mode duplex
female
connector
Cable Specifications
Fiber Types: Multi-mode optical fiber
Wavelength: 1310 nm
Core Size: 62.5 micrometers
Cladding Diameter: 125 micrometers
Range: Short/2 kilometers
Min/Max Tx Power: -19 dBm/-14 dBm
Rx Sensitivity: -30 dBm
Cabling the Optical (ATM) Line Cards