Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Installing Application Cards
Step 8
Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the application card's front panel to secure
the card to the chassis.
Step 9 Repeat step 1 through step 8 for every application card you are installing.
Step 10
Install blanking panels over any unused chassis slots.
To reduce the risk of electric shock and to ensure proper ventilation, blanking panels must be used to cover any chassis
slot that is not occupied by an application card.
Leere Steckplaetze muessen mit der dafuer vorgesehenen Abdeckplatte geschlossen werden, um die Luftzirkulation
innerhalb des Geraets zu gewaehrleisten und um einen elektrischen Schlag zu vermeiden.
a) Position the blanking panel over the unused chassis slot.
b) Use a Phillips #2 screwdriver to tighten the screws at the top and bottom of the blanking panel to secure the panel to
the chassis.
c) Repeat step a and step b for any additional unused chassis slots.
Step 11
Proceed to the Line Card Installation chapter.

ASR 5000 Installation Guide

72
Application Card Installation