Gigabit Ethernet Card (Xgl) - Cisco ASR 5000 Installation Manual

RMA Shipping Procedures

10 Gigabit Ethernet Card (XGL)

XGLC Card Types
The packing instructions in this section applying to the following full-height XGLCs:
• ASR5K-0110G-MM-K9 – 1-Port 10 Gigabit Ethernet Line Card (XGLC) [MM SFP+]
• ASR5K-0110G-SM-K9 – 1-Port 10 Gigabit Ethernet Line Card (XGLC) [SM SFP+]
Packaging a Full Height XGLC
The packaging sequence is as follows:
Step 1
Place the card inside the ESD bag; fold over and seal the bag with an ESD Label or tape as shown in the photos.
Step 2 The XGLC shipping carton includes a bottom foam piece and two top foam pieces. Insert the XGLC in the bottom foam
piece and place the two top pieces in the slots at either ends of the card as shown in the photos:
10 Gigabit Ethernet Card (XGL)
ASR 5000 Installation Guide
273