Replacing The Sd Flash Memory Card - Cisco IR8340 Installing And Connecting

Installing and Connecting the Router
Figure 4: Mounting Screw Slots
1

Replacing the SD Flash Memory Card

Follow these steps to replace the SD flash memory card:
Step 1
Locate the flash memory card slot on the cable-side of the router.
Step 2 Loosen the captive thumb screw. (Be careful not to cross-thread or over-tighten the thumb screw.)
Step 3
Pull the cover open, and pull the cover tab from the hinge.
Step 4 Gently push the flash memory card to eject it. Place it in an anti-static bag to protect it from static discharge.
Step 5 Push the replacement card into the slot, and press it firmly in place. The card is keyed so that you cannot insert it the
wrong way.
Step 6 Place the flash card slot cover tabs into the hinge.
Step 7
Close the cover, and hand-tighten the screw.
Mounting screw slots (6)
Replacing the SD Flash Memory Card
Installing and Connecting the Router
7