Table of Contents
Advertisement
46
4.11 Sewing backwards with the stitch regulator
(optional)
The electronic stitch regulator on the machine arm reduces the
stitch length down to sewing backwards in the lower end position.
Fig. 29: Sewing backwards with the stitch regulator
①
(1) - Stitch regulator
1.
Slowly push the stitch regulator (1) down.
The stitch length keeps decreasing up to the middle of
the adjustable range. Starting with this position, the machine
will sew backwards, with the stitch length increasing.
In the lower end position, the machine sews backwards with
the set stitch length.
4.12 Quick functions on the push buttons
The machine has push buttons on the machine arm which can be
used to activate specific functions while sewing. You can define
the settings in the software ( p. 71).
Operating Instructions D888 e-con - 00.0 - 12/2023
Operation
Advertisement
Table of Contents
