Adjusting The Sewing Foot Pressure; Adjusting The Stitch Length; Quick Functions On The Push Buttons; Activating/Deactivating Function Keys - Dürkopp Adler 550-D800 Operating Instructions Manual

Operation

4.6 Adjusting the sewing foot pressure

Users with the proper access rights can set different sewing foot pressure
levels for every seam section.
You will find the setting option in the software on the start screen:
Seam pr. > Editor > DacFlex

4.7 Adjusting the stitch length

Users with the proper access rights can set different stitch lengths for ev-
ery seam section (in the software on the start screen under Seam pr.).

4.8 Quick functions on the push buttons

The machine has push buttons on the machine arm which can be used
to activate specific functions while sewing. You can define the settings in
the software: Check - DacFlex Commander. Refer to the Operating
Instructions D867, chapter Programming, for detailed instructions.

4.8.1 Activating/deactivating function keys

Fig. 29: Activating function keys
(1) - Favorite buttons
(2) - Sewing backwards
(3) - Needle position
(4) - Bartack suppression
Activating a function
To activate a function key:
1. Press the desired button.
 Function is activated. The button lights up.
Operating Instructions 550-D800 - 01.0 - 05/2023
② ③ ④
①
(5) - Stitch length preselection
(6) - Additional value
(7) - fully customizable button
⑤ ⑥ ⑦
Needle thread tension
41