Sewing Backwards With The Stitch Regulator (Optional); Quick Functions On The Push Buttons - Dürkopp Adler D887 e-con Operating Instructions Manual

Operation
Operating Instructions D887 e-con - 00.0 - 11/2023
4.11 Sewing backwards with the stitch regulator
(optional)
The electronic stitch regulator on the machine arm reduces the
stitch length down to sewing backwards in the lower end position.
Fig. 28: Sewing backwards with the stitch regulator
①
(1) - Stitch regulator
1. Slowly push the stitch regulator (1) down.
 The stitch length keeps decreasing up to the middle of
the adjustable range. Starting with this position, the machine
will sew backwards, with the stitch length increasing.
In the lower end position, the machine sews backwards with
the set stitch length.

4.12 Quick functions on the push buttons

The machine has push buttons on the machine arm which can
be used to activate specific functions while sewing. You can define
the settings in the software ( p. 74).
47