Maintenance - Dürkopp Adler 550-D800 Operating Instructions Manual

Maintenance

6
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Advanced maintenance work may only be carried out by qualified special-
ists ( Service Instructions).
Maintenance intervals
Work to be carried out
Check the bobbins for wear and damage and replace them
if necessary
Cleaning
Removing sewing dust and thread residues
Lubricating
Lubricating the machine head
Lubricating the hook
Servicing the pneumatic system
Adjusting the operating pressure
Draining the water condensation
Cleaning the filter element
Operating Instructions 550-D800 - 01.0 - 05/2023
Maintenance
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8 40 160 500







211