Quarter Window - Suzuki sq-416-420-625 Service Manual

QUARTER WINDOW

REMOVAL AND INSTALLATION
Refer to "WINDSHIELD" section as removal and installation proce-
dures and cautions are basically the same. However, note the fol-
lowing.
NOTE:
D Before applying primer to glass edge, install molding ac-
cording to installing position shown in figure.
D Observe following precautions when applying adhesive
along glass edge.
– Adhesive should be applied evenly especially in height.
– Be careful not to damage primer.
– Press glass against body quickly after adhesive is applied.
Height
Width
Clearance "e" : 1 mm (0.04 in.)
1. Fastener
2. Glass
3. Molding
4. Adhesive
5. Primer
"b": 12 mm (0.47 in.)
"d": 16 mm (0.63 in.)
"c" : 8 mm (0.31 in.)
BODY SERVICE 9-15