Suzuki sq-416-420-625 Service Manual page 167

7) Apply power steering fluid to sliding surface of cam ring.
8) Install cam ring to pump body. The tapered end of cam ring
should face the side plate.
1. Cam ring
2. Side plate
9) Apply power steering fluid to each vane.
10) Install vanes (10 pieces) to rotor.
1. Rotor
2. Vane
11) Apply power steering fluid to O-ring.
12) Install O-ring to pump body.
1. O-ring
13) Apply power steering fluid to sliding surface of pump cover and
rotor.
14) Match the dowel pins to the holes of the cover plate as shown
and install pump cover to pump body.
1. Dowel pin
2. Cover plate
POWER STEERING (P / S) SYSTEM 3B1-23