Suzuki sq-416-420-625 Service Manual page 244

7) Using special tools (B) & (C) indicated below, draw out axle
8) For vehicle without ABS, remove LSPV stay from axle housing.
1. LSPV stay
9) Remove brake back plate from rear axle housing.
10) Disconnect brake pipe from flexible hose and remove E-ring
1. Flexible hose
2. E-ring
3. Brake pipe
4. Cross member
11) Remove brake pipe clamps and pipes from axle housing and
1. Hose
2. Axle housing
12) Disconnect propeller shaft and remove propeller shaft from
1. Propeller shaft
2. Differential carrier
shafts. For vehicle equipped with ABS, remove wheel speed
sensor from axle housing before drawing out axle shaft.
NOTE:
Use care not to pull brake back plate along with shaft.
Special Tool
(C): 09943-35512
(B): 09942-15510
(front side).
disconnect breather hose from axle housing.
transmission.
REAR SUSPENSION 3E-17