Suzuki sq-416-420-625 Service Manual page 339

1. Rear axle shaft
2. Wheel bearing
3. Brake back plate
"A"
1. Rear axle shaft
1. Rear axle
housing
INSTALLATION
1) Apply sealant to mating surface of bearing retainer with brake
back plate.
"A": Sealant 99000-31110
NOTE:
Make sure to remove old sealant before applying it anew.
2) Install brake back plate to rear axle shaft.
3) Apply sealant to joint seam of rear axle housing and brake back
plate.
"A": Sealant 99000-31110
NOTE:
Make sure to remove old sealant before applying it anew.
4) Install rear axle shaft to rear axle housing.
5) Tighten brake back plate nuts to specified torque.
Tightening Torque
.
(a): 23 N m (2.3 kg-m, 17.0 lb-ft)
PARKING AND REAR BRAKE 5C-15