Suzuki sq-416-420-625 Service Manual page 638

9-20 BODY SERVICE
INSTALLATION
Reverse removal procedure to install back door/rear gate noting
following points.
D Secure wiring harness.
D Secure back door/rear gate sealing cover.
1. Sealing cover
2. Adhesive
NOTE:
Use adhesive to seal sealing cover to back door/rear gate.
D Adjust back door/rear gate latch striker position by referring
"BACK DOOR LOCK ASSEMBLY INSTALLATION" so that back
door/rear gate is positioned correctly.
D Adjust back door/rear gate cushion so that back door/rear gate
contacts body when closed.