Suzuki sq-416-420-625 Service Manual page 767

DEPLOYED AIR BAG (INFLATOR) MODULES
WARNING:
D The air bag (inflator) module immediately after deploy-
ment is very hot. Wait for at least 30 minutes to cool it off
before proceeding the work.
D Do not apply water, oil, etc. to deployed air bag (inflator)
module.
D After an air bag (inflator) module has been deployed, the
surface of the air bag may contain a powdery residue. This
powder consists primarily of cornstarch (used to lubri-
cate the bag as it inflates) and byproducts of the chemical
reaction. As with many service procedures, gloves and
safety glasses should be worn.
D Wash your hands with mild soap and water after complet-
ing the work.
Refer to the procedure described under "Deployed Air Bag (Inflator)
Modules Disposal" in this section.
ACTIVATED SEAT BELT PRETENSIONERS
WARNING:
D The seat belt pretensioner immediately after activation is
very hot. Wait for at least 30 minutes to cool it off before
proceeding the work.
D Do not apply water, oil, etc. to activated seat belt preten-
sioner.
D With many service procedures, gloves and safety glasses
should be worn to prevent any possible irritation of the
skin or eyes.
D Wash your hands with mild soap and water after complet-
ing the work.
Refer to the procedure described under "Activated Seat Belt Pre-
tensioners Disposal" in this section.
AIR BAG SYSTEM 10B-61