Suzuki sq-416-420-625 Service Manual page 34

G16 with P / S
G16 with P / S and A / C
H25 with P / S
H25 with P / S and A / C
1. Crankshaft pulley
2. P / S pump pulley
3. A / C compressor pulley
(if equipped)
Power steering pump and/or A/C compressor drive belts (if
equipped) for G16 and H25 engines.
Inspection
1) Disconnect negative cable at battery.
2) Inspect belt for cracks, cuts, deformation, wear and cleanliness.
3) Connect negative cable to battery.
Replacement
Replace belt referring to Section 1B or 3B1 for replacement proce-
dure of belt.
4. Tension pulley
5. Tension pulley bolts
If any defect exists, replace.
Check belt for tension.
Power steering pump and/or A/C compressor drive belt
tension.
"a": 6 – 9 mm (0.24 – 0.35 in.) deflection under 100 N, 10 kg
or 22 lb pressure.
"b": 4 – 7 mm (0.16 – 0.28 in.) deflection under 100 N, 10 kg
or 22 lb pressure.
If belt tension is out of above specification, adjust it referring to
Section 1B or 3B1.
MAINTENANCE AND LUBRICATION 0B-7