Suzuki sq-416-420-625 Service Manual page 518

7E-16 DIFFERENTIAL (FRONT)
1. Drive shaft joint R
2. Differential housing
(a)
8) Using 2 large screwdrivers as levers, pull out right side drive
3. Transmission jack
4. Screw driver
REMOUNTING
For remounting, reverse dismounting procedure and use following
tightening torque.
Tightening Torque
(a): 50 N
After tightening all fasteners properly, fill hypoid gear oil as speci-
fied and check tightening of plugs with specification.
(a)
(a)
shaft joint from differential and dismount housing assembly from
vehicle.
CAUTION:
During above work, use care not to cause damage to
drive shaft boot.
.
m (5.0 kg-m, 36.5 lb-ft)