Suzuki sq-416-420-625 Service Manual page 522

Viscosity chart SAE
ON-VEHICLE SERVICE
MAINTENANCE SERVICE
NOTE:
D When having driven through water, check immediately if wa-
ter has entered (if so, oil is cloudy). Water mixed oil must be
changed at once.
D Whenever vehicle is hoisted for any other service work than
oil change, also be sure to check for oil leakage and status
of breather hoses.
CHANGING OIL
NOTE:
D Hypoid gear oil must be used for differential.
D It is highly recommended to use SAE 80W-90 viscosity.
1) Before oil change or inspection, be sure to stop engine and lift
2) Check oil level and existence of leakage. If leakage is found, cor-
3) Drain old oil and pour proper amount of gear oil as specified
4) Torque drain and level/filler plugs to specification.
1. Breather hose
2. Oil filler / level plug
3. Rear drain plug
(Apply sealant)
up vehicle horizontally.
rect its cause.
(roughly up to level hole).
"A": Sealant 99000-31110
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
.
(b): 28 N m (2.8 kg-m, 20.5 lb-ft)
Specified gear oil: Hypoid gear oil API GL-5
SAE 75W-85, 80W-90 or 90
For oil viscosity, refer to the chart
at the left.
Oil capacity : 2.2 liters (4.6/3.9 US/Imp. pt.)
DIFFERENTIAL (REAR) 7F-3