Connector Pinouts For The Srx550 High Memory Services Gateway Console Port - Juniper SRX550 Hardware Manual

Table 22: RJ-45 Connector Pinouts for Services Gateway Ethernet Port (continued)
Pin
6
7
8
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway
Console Port
The port on the front panel labeled CONSOLE is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle
that accepts an RJ-45 cable for connecting the services gateway to a management LAN (or other device
that supports out-of-band management).
the console port.
Table 23: RJ-45 Connector Pinouts for the Services Gateway Console Port
Pin
1
2
3
4
5
6
7
8
Signal
RX-
Termination network
Termination network
Table 23 on page 70
Signal
RTS
DTR
TXD
Ground
Ground
RXD
DSR/DCD
CTS
describes the RJ-45 connector pinouts for
Description
Request to Send
Data Terminal Ready
Transmit Data
Signal Ground
Signal Ground
Receive Data
Data Set Ready
Clear to Send
70