Si (Safety Integrated): User Confirmation - Siemens SINUMERIK 840D Operator's Manual

4
03.04

4.4.5 SI (Safety Integrated): User confirmation

User
confirmation
References
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
If the "User enabling" option is installed on the NC, you must enable
or disable the function depending on the keyswitch position in the
"Approach reference point" operating mode.
User enabling can only be granted if keyswitch position 3 or higher is
selected for the keyswitch position.
The displayed values always refer to the machine coordinate system
(MCS).
Operating sequence
"Jog Ref" mode is selected in the "Machine" operating area.
The channel to be referenced is already selected.
Press softkey "User confirmation".
The "Confirm machine positions" window is opened.
The machine axes in the MCS are displayed, together with the current
position and a checkbox for activating/deactivating the user
confirmation.
Place the cursor on the required machine axis.
Activate or deactivate the user confirmation for the selected machine
axis via the "Select" key.
Check whether a reference point approach has been performed on
the relevant axis. If not, error message "Please reference axis first" is
displayed. User agreement cannot be activated for the axis until it has
been referenced.
Further information
The function user enabling is only provided if user enabling is required
for at least one axis of the channel.
For more information please refer to:
/FBSI/, Description of Functions SINUMERIK Safety Integrated.
Machine Operating Area
4.4 Jog operating mode
4
4-93