Function Scope - Siemens SINUMERIK 840D Operator's Manual

5
Parameters Operating Area
5.4 ShopMill tool management
Magazine
References

5.4.1 Function scope

Tool types
5-152
Fixed/flexible assignment of locations
You can define via a machine data whether all tools are fixed or
variable location coded.
•
With fixed location coding, the tool is permanently assigned to a
magazine location. This concept can be used for machines with
disk-type magazine.
•
With variable location coding, a tool can also be conveyed to a
magazine location other than the original location. This concept
can be used for machines with chain magazine. Individual tools
can be set to fixed-location-coded in the tool wear screen display
at the operator interface.
The magazine locations are listed with their tools, magazine locations
are indicated as disabled/not disabled, and the properties assigned to
the active tool (e.g. oversize) are displayed in the magazine list.
/FBW/ Description of Functions Tool Management or
/FBS/ Description of Functions ShopMill
/BAS/ Operation/Programming ShopMill
Function
ShopMill tool management supports the following tool types, tool
parameters and magazine parameters:
– 120 End mill
– 200 Twist drill
– 220 Center drill
– 710 3D probe
– 711 Edge probe
– 110 Cylindrical die sinker
– 111 Ballhead cutter
– 121 End mill with corner rounding
– 155 Bevel cutter
– 156 Bevel cutter with fillet
– 157 Conical die sinker
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
 Siemens AG, 2004. All rights reserved